Customer ratings for Rocktile JB-Style DIY Electric Bass Guitar Assembly Kit

I didn't have really high expectations for this price. Body has a good looking grain, it's pretty soft, dents easily (expected), but it has no sealer so it saved me a lot of sanding which was nice. Neck looks pretty, had to enlarge the machine heads holes, but it's not the end of the world. Neck holes were drilled really off, had to fill them and redrill which was probably the biggest negative. Hardware and electronics are cheap as expected, but get the job done and pickups actually sound not bad at all. Overall it needed a bit more work than anticipated and wanted but got an OK result in the end.

If you think to build 70s Jazz Bass copy, that's not what you want. Note, that bridge pickup position is't 70s like photo show, it's nearer 60s position (little bit farer away bridge).

Mein 4. Bausatz. Er kam, wie bisher immer, schnell und gut verpackt an. Alle teile waren immer vollzählig. Sehr schöner Body. Keine Kitstellen, was bei den Rocktile Bautätzen öfter vorkommt.

Hab mir deshalb Zeit gelassen mit dem schleifen und Ölen. Mattglanz nur mit Leinöl. Sieht aber aus und fühlt sich fast an wie Autolack - besser sogar.

Sound bis jetzt nur mit den mitgelieferten Seiten getestet (sind zwar dünn, aber besser mit denen erst mal alles testen, einstellen und einspielen) und bin trotzdem positiv überrascht. das Gewicht des Basses ist schön schwer. Der Hals ist nicht zu weich. Nicht zu Kopflastig.

Natürlich bekommt man für den Preis kein Urwerk. Der Pickguard und die Halstasche haben unten etwas Luft, die Schrauben sind weich, und man muss die vorsichtig anziehen. Bin mit der Seitenhöheneinstellung an der Brücke schon fast am Anschlag nach unten. Evtl. habe ich da aber selber zu viel vom Halsfuß abgeschliffen. Ist aber noch im Toleranz Bereich und ließe sich wenn nötig verbessern. Das mitgelieferte Klinkekabel ist nicht gut und wird nicht verwendet.

Meiner Meinung nach ist das Instrument Studio und Bühnen tauglich. Wenn man dann noch extra Zeit und Geld investiert braucht man sich vor den teuren Bässen nicht verstecken. Anfängern würde ich aber den P-Bass empfehlen.

A really nice kit with flexible option . It is coming with a very detailed and helpful manual. The quality of the component is good, the wooden parts are well prepared.

Good quality kit, assembly without bp. Rendered very good.

Easy to assemble kit. You can carve the head of the handle, it's cool!
Very soft body wood (easily marked with the nail or at the slightest shock), but given the small price, it's not very surprising..... sound correct.

Moin together,
have now ordered for the second time a kit from Kirstein.
The first (Preci-Bass) has made about 30h Arbeut and sounds with the
Ampeg SVT 4Pro for my semi-professional demands very cool!

For the second JB project I will choose a 70's style. On the
I am already looking forward to the sound!

to all hobby bassists. an doesn't just sound like Glenn Hughes or Victor.....
Everybody has his own sound in his fingers.

The bass kits offered here leave a lot of room for a unique
unique design. The quality of the woods is good, if you sand them properly!

Unbeatable in a price-performance comparison.

Conclusion: THUMBS HIGH

Prompt delivery . All parts are present and in order. The bass is easy to assemble. You should not expect too much of the sound, but the price-performance ratio is optimal. Especially for someone who wants to get into electric bass playing, this is a good option without investing too much money. I have already assembled an electric guitar from Rocktile and can also recommend it.

A TOP price-performance ratio. I was very satisfied with the kit. The construction of the bass has worked flawlessly.

It seems all the parts are there, only have unpacked equal times two frets loosened, one of them has fallen out completely.
Since I do not need the neck anyway, it does not matter in my case for now, although the fit of neck and body is very good.

The pre-drilled holes of the bridge do not quite fit, you should tighten the screws in the correct order, so first put the bridge on it, align it and tighten the screws that fit first. Then you can widen the not quite matching holes caution a little...

Pickups, tuners and pots are OK for the price, but I would throw the strings in the trash, they are useless. For about 25 ears there is already called very good bass strings.

All in all, the kit is not bad at all, although I am of the opinion that there are qualitative differences within each charge again.

Super fast delivery, great bass kit with good instructions. Makes real fun.

+Delivery promptly made!
+Everything complete without defects
+Instruction and YouTube tutorials
+fun factor
+usable second instrument for little money

If you don't mind the occasional maple board getting lost between the lime trees, this is a very good kit that fits accurately, is easy to assemble and produces a very good end result for the price range.

The kit is a really good part in this price range , relatively easy to assemble and also well playable , one can recommend well - also suitable for beginners .

Was fun to assemble, electrics were all ready soidered/ stained with Mahogoney/ wood etched by pro/ Christian Cross on back, Lion on front.
sebastian.pink@hotmail.de He did the wood -art ,on the Bass-gitarre ! Made it personnel !

der Preis ist echt unschlagbar. gleich nochmal einen bestellt ;)

The bass is already great, except that the sides are not so great and the plan for the electronics..... well for a layman a thing in itself. But I got everything together anyway and ordered different strings. Top, it was fun and just great for me as a beginner.....
Thanks to you,
best regards,
Sami🕉🙃♾️

great part

This is already my third Rocktile bass kit and I would also buy the fourth one...

The first kit was also a 5-string and I now play it on stage.

The second kit was supposed to be a custom model with maximum modification. I realized that I needed the 5th string. That's why I ordered the third kit.

I think the fit and accessories are good. The strings supplied are disappointing, but the bass sounds much better with a good set of strings.

The body could also be made of nicer wood. A transparent finish would show unsightly spots in the wood. However, this is no longer noticeable with a lacquer finish.

Once the surfaces are nicely finished, the rest is actually child's play. Assemble, align, adjust, tune and start playing.

Bass #1 convinces with enormous fret purity and, after readjusting the neck, string action, ... very nice to play. I'm really looking forward to the next model :-)

i am very amazed at how well everything fit. Super to edit. The result is great. I was also surprised that the bass sounds really good. I play more the rock track and there he has decent lows, but also enough "crispness" in the upper mids, which gives out a nice attack presence. As already written, I was and am surprised.
A small drawback is that the body is quite light, making the bass a bit top-heavy.
Conclusion: for little money an entertaining tinkering pastime and in the end a super instrument.

I got the kit of the electric bass spontaneously as a Black Friday offer. Within 2 days I had the kit.
All parts were available and the untreated body had a great grain,
So I just waxed/oiled the wood parts.
Everything fit beautifully and nothing had to be refinished. For my purposes, it sounds great. The string adjustments were easy to do.
Nothing shrieks.
It was really worth the purchase.
Thank you Kirstein.

Having already built a jazz bass years ago after a jazz guitar, I now wanted to mount a precision bass. As a guitarist, I was missing a bass in my collection.
The description foreshadowed that it would be a lightweight due to the wood used for the body, but as a retiree that suited me just fine. I sanded all parts several times, the neck less than the body, because it was very rough, especially at the curves. The headstock got the familiar shape. For coloring I used hardwood oil, the neck remained natural and was only matt varnished. I also gave the body two coats of varnish after more than a week to make the surface a little less sensitive. After assembling all the parts and adding an "ashtray" to the bridge, my bass was as I had envisioned it. I play it through an old Vox Tonelab into the PC and am taken with the tonal variety with this unit. Absolutely recommended purchase for fans who can't afford or don't want an original and enjoy DIY. Unfortunately, you can not insert a picture here, but I have created a great unique with the harmonious wood grain.

It is the first kit I make and the truth is that I loved it, I gave it something personal. The materials are very good. Maybe I will make another one.

Delivered quickly, good workmanship great grains. Top

It was a new and very satisfying experience, easy to paint and assemble, sounds great I'm happy with the 'purchase, thanks!

I am very happy with the bass. Originally I was very skeptical of a "kit" because I had bad experience with a Cajon kit. But with a little help from my bass teacher, a manual and the good preparatory work of the producing company, I had my own bass in my hand after 9 hours of work.
The body had small frayed holes in the fornier in some places. We had to repair these with special wax. But the beautiful grain of the wood is really nice, especially after waxing:
The cables of the potentiometers were soldered together incorrectly, which we had to separate again completely and soldered together according to our own plan.
Otherwise, all parts were included; except for a not at all pre-drilled hole, all holes were exactly pre-drilled.

I am very happy with the result, without "professional" help it is just not so good realizable in the first attempt, in my opinion.

The body wood is very light, looks like poplar, in 3 glued boards.
Has a layer of marbled burl(I think), about 1mm, veneered on the front. You need to sand and water a couple of times to get the grain off the wood before painting. With such nice grains I chose a stain to not cover them, then clear varnish to make it shiny.
As far as I'm concerned the pickups and electronics are its weak point, the neck is nice and smooth and the tuners hold tuning well. If you know how to assemble it and how to do the setup (you may need to change the angle of the neck with respect to the body for a correct action) it's a great bass, for what it costs it's absolutely worth it...

I am very pleased with my purchase.
I am in the process of finishing the body and neck with shellac method treated like a valuable piece of furniture.
The body is in two pieces but the joint is invisible and the woods have the same grain.
I gave my own design to the headstock, without copying any famous brand.
The tuning machines are well chromed.
We will see the final effect after the assembly, the setting and then the sound!!!
For now, very satisfied.

The kit is okay. Were all the parts available.
The veneers are bad. They have significant scratches that could not be sanded out.
The heartwood had to be worked in so much that the boddy got a different shape.
Sumar Sumarum I will consider buying another kit.
I have bought the kit 137.

Really well made handle, the bodysuit needs a bit of work but worth every euro spent.
Really funny.
I haven't finished the assembly yet so I can't tell you how the electronics work yet.

The delivery arrived well, all individual parts are in good quality, body and neck are well finished, no rework required.
Unfortunately, the instructions for wiring / soldering is not correct, the Gafiik does not fit the model (there is no 3-way switch here!) Also in the otherwise good video is missing the more detailed information, which wire with which color should be soldered to which pin.

This will be an awesome bass with new paint and raven black strings.
Greeting Heiner

Fast delivery, well packaged. All holes were (pre)drilled for easy and quick assembly.
Doesn't come with a small socket to adjust the bridge.
Area under the scratchplate should be lined with aluminum foil and the bridge should be well 'grounded' to prevent buzzing from the amp.

The strings stay in tune and you can let your imagination run free when it comes to the finish.

Would order the kit again if i had to and would recommend it to anyone who wants to build and play a cheap bass guitar!

The kit is very nice, cleanly worked and absolutely worth the money. Already the unpacking makes a lot of joy! Unfortunately, the kit is not designed for active operation, but even so it is super good. With a little craftsmanship, you can assemble a bass that looks great and does not need to shy away from the public!
All around a super part.

But that is not the only plus point for the bass kit. The assembly of the kit is easy and he finished bass has a good sound. The most beautiful thing is really the body, the grain of the top plate is wonderful and makes an elaborate paint job unnecessary. The purchase was worth it.

As a musician on other instruments and a hobbyist, the challenge of completing a bass myself was very appealing to me. To sum up: I had a lot of fun with the tinkering and I've been using the finished instrument for a few months now as a beginner's instrument for music lessons. The body has a very nice wood grain so that clear varnish was enough as a finish. I modified the bridge (the adjustment range for the octave purity was a bit tight and the side distance was quite small), the action (too heavy, therefore top-heavy) and the strap pins (replaced by safer locks). Everything else is perfectly fine especially in relation to the price and suitable for the intended use. So: a clear recommendation from me for the JBH5 kit from Rocktile for all who enjoy tinkering and bass.

On first visual inspection, the parts show no defects or flaws. The body is light and well built with a thin decorative maple veneer on the front. The machining seems correct and the neck fits loosely into the body box. I like the neck a lot, with an almost flat fingerboard and reduced thickness. Solid, with very good woods and the fine frets perfectly aligned without any of them sticking out. Like the rest of the body, it needs to be worked on to polish them and file some edges, but let's not forget that it's a kit and that's what it's all about: working on it, having fun doing it, learning and hoping that the final result pays off.

The chrome components have surprised me by the quality they look, especially the bridge. The electronics seem a bit weaker, but it's a visual impression; we'll see when it's working. I might replace the small screws for a better quality one, as well as the strings for flatwound ones.

I have no opinions about the assembly, as that will be after Christmas, as the kit is for a gift.

The price is a bit high for a kit, but I think it is compensated by the quality of the set. I need to evaluate the final result to be able to better gauge the value for money.

the thickness and shape of the body are in conformity with the original, the handle is slightly wavy, and the wood of the body is also very beautiful and without imperfections, an assembly before painting has confirmed the quality of the product.
I am really very satisfied with this purchase and the speed of delivery.
Bernard.

Article ordered and received the next day - what more could you want - very satisfied

The wood look of the body is great and looks very good without varnish only waxed, but not only the look is good also the sound convinces. The parts of the kit are all well made and the assembly works problem-free. The only drawback: The pickup has only two cables led to the outside, so then also the one volume pot is superfluous, for this then also a star deduction.

I am satisfied with the kit anyway, especially the price / performance ratio is super.
I would buy the kit again.

The instrument arrived in excellent condition and very few days from the date it was sent. Obviously with such a low price I wasn't expecting a perfect instrument, but it was better than I thought! The electronic part works perfectly and the sound is not bad, the tuners and the bridge do their job and the assembly was quick and fun. Even so, I did find a few issues, such as the pickguard being badly cut in some places and the bridge screw holes being slightly off center, but nothing that can't be fixed with a little work.
I was very happy with this purchase, and I recommend it to all those who would like to gain experience building an instrument that they can modify as they want, in every way.

To my 5-string Ibanez BTB bass I was looking for a cheap passive alternaitve for home. It did not necessarily have to be a 5er. The kit has simply appealed to me: On the one hand, I like to tinker and always try to "bigger" projects on the other hand - a P-bass has something.
All in all, it was relatively easy with the kit to create "his" instrument. All parts are of good quality, the pickups are amazingly good for the price, the poties don't scratch. The only drawback: The screws for the pegs! Here, despite pre-drilling 3 pieces at the head are torn off (one I could still remove). I then threw away the remaining screws and replaced them with something more solid.
After a short adjustment of the neck curvature - was not much necessary - and the string action, the first tests surprised me: No 100€ and the part actually sounds like a min. 600€ bass. Well bravo!

It was total fun to build the kit together!
Unfortunately, the plan for connecting the electronics is not quite understandable... but after I have improved the error, the bass sounds better and the pots do what they should!
It plays well .... and visually you can go wild individually anyway. (Thanks to the videos!)
For practicing and making noise at home, the kit is very well suited.
I would buy a kit again!

Everything worked great, fast shipping and well packed.
Construction has already begun, I'm curious how the bass violin sounds
Conclusion so far. buy and become creative

When I saw the kit for a Preci electric bass, I thought at first well, that's a nice toy, but certainly not suitable as an instrument. But I decided to buy this kit, the payment and delivery worked great and when the package arrived with my new bass, I experienced when unpacking, already the first surprise. All parts of the kit were in perfect condition, the body I found so good that I gave up my plan to paint the body. The body and the neck were only waxed by me and have a super look. After assembling, adjusting and tuning, my new bass surprised me with a great sound. The kit is definitely not a toy, but is perfect for making music. I have not regretted to have ordered the bass and would do it again at any time.

I can only recommend. My next kit is already in the shopping cart

I didn't expect much from a 90 € kit, and in fact it had a few problems: I had to re-drill the tuning machines' holes, the neck didn't perfectly fir the body (I solved the problem by adding a 1 mm layer in the neck cavity) and I had to add some wood in the strap locks holes because they kept falling off. However, the bass turned out pretty good: it sounds decent, the neck feels nice to play and overall it was a very fun project.
If you want to try to build your own instrument for the very first time I would 100% recommend this kit.