Pronomic NetCore SR-3FM XLR Rackbox Multicore Patch Bay F/M Parallel

Flexible multicore system!

Quickly need a 4-channel multicore of any length? No problem! The NetCore system from Pronomic sends both analogue and digital signals through a thin network cable.

Ingenious technology

There are 4 pairs of wires in a Cat cable - so 4 balanced audio signals can also be routed in a single thin cable. The shielding of the cable acts as signal ground, so operation is only possible with shielded network cables. As the NetCore system works with conventional network cables, it is also possible to use an existing house network, e.g. to route the signals from one room to another. The prerequisite for this is a direct wiring of the boxes - there must not be a switch or similar in between.

The parallel stage box

The special feature of this box is its flexibility: The 4 wire pairs are each wired in parallel, thus a signal line in one or the other direction is possible (for example 3 microphones and 1x monitor signal).

Any combination is possible

The NetCore system comprises several stage boxes, rack units and whips, any of which can be connected to any other component. It doesnt get more flexible than that.

Application

The possible uses of a NetCore line are very diverse, for example:

• From the drums to the mixing desk
• From the mixing desk to the monitors
• As a submulticore for keyboards to the mixing desk
• From the DMX controller to the lighting effects (4 DMX lines at the same time)

You cant lay a multicore more elegantly and slimly. To avoid possible noise interference we recommend using a NetCore line only completely for analogue OR digital signals.

Simple, practical, cost-effective!